Home » Products » Signal Management » VGA Switcher » Pt-VGA0802/04/08-A VGA Switcher
inquiry form

Pt-VGA0802/04/08-A VGA Switcher

Pt-VGA0802/04/08-A VGA switcher is a matrix switching device that supports 8-channel audio and video signal input as well as 2, 4 or 8-channel audio and video signal output. It is used to synchronously or asynchronously switch multiple computer signals as well as audio and video signals to one of the multiple output channels.

Features
1. Our VGA switcher adopts the distortion compensation technology for long-distance signal transmission.
2. Programmable logic array circuits are adopted and arbitrary switching is supported.
3. Audio and video signals can be switched synchronously or separately.
4. Channel switching permission settings are supported and the switching permission of audio and video channels can be managed separately.
5. Five-pin 3.8mm Phoenix connectors are used for audio signal input and output.
6. The volume of each audio output channel can be separately adjusted.
7. Our VGA switcher supports power off memory function and power failure on-site protection function.
8. Housed in a 2U metal case, this VGA switcher can be installed in a 19-inch rack.

Technical Parameters
Model Pt-VGA0808-A Pt-VGA0804-A Pt-VGA0802-A
Video
Gain 0 dB
Bandwidth 350MHz (-3dB), full load
Crosstalk of multi-channel to one channel -60dB @10 MHz, -39dB @100 MHz
Switching speed 200 ns (max.)
Signal type RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video
Video Input
Interface 8 DB15 female connectors
Signal intensity 1Vpp: Y component video, S-video, composite video
0.7Vpp: VGA (Computer signal)
0.3Vpp: R-Y and B-Y component video, S-video
Minimum / maximum level Analog signal: 0.5Vpp / 2.0Vpp
Impedance 75 Ω
Return loss -30dB@5MHz
Maximum DC offset error 15mV
Video Output
Interface 2/4/8 DB15 female connectors
Minimum / maximum level 0.5Vpp ~ 2.0Vpp
Impedance 75 Ω
Return loss -30dB@5MHz
DC offset ±5mV
Synchronization Signal
Input / Output type RGBHV, RGBS, RGsB, RsGsBs, composite video, component video
Video format NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level 0.5V- 5.0Vpp: 4.0Vpp normally
Output level AGC-TTL: 5Vpp, unterminated
Input impedance 510 Ω
Output impedance 75 Ω
Maximum transmission delay Horizontal: 90ns
Vertical: 160ns
Maximum rise / fall time 4ns
Polarity Positive or negative (fully consistent with the input)
Audio Signal
Input / output interface 5-pin 3.8mm Phoenix interface
Interface gain 0dB
Frequency response 20 Hz ~ 20 kHz
Total harmonic distortion + noise 0.03% @ 1 kHz (at rated voltage)
SNR >90dB
Stereo separation level >80dB @ 1 kHz
Common mode rejection ratio (CMRR) >75dB @: 20 Hz ~ 20 kHz
Signal type Stereo, balanced or unbalanced connection method
Impedance Input: >10 kΩ (balanced or unbalanced connection method)
Output: 50 Ω (unbalanced connection), 100 Ω (balanced connection)
Maximum input level +19.5dBu, balanced or unbalanced connection method
Gain error ±0.1dB
Maximum output level +19.5dBu, balanced or unbalanced connection method
RS-232 Control Interface
Serial control interface RS-232, 9-pin D-type female connector
Baud rate and protocol Baud rate: 9600, date bit: 8 bits, stop bit: 1, no parity bit
Serial control port structure 2 = TX, 3 = RX, 5 = GND
Keyboard Control Interface
Control interface 4-pin Phoenix connector
Usage mode Used in conjunction with the MCP100 extended keyboard
Control port structure +5V=DC5V , + = DATA+, -=DATA-, GND = Signal Ground
Ethernet Control Interface
Ethernet control interface RJ-45 female port
Ethernet control protocol TCP/IP
Ethernet control rate Adaptive 10M or 100M, full-duplex or half-duplex
Specification
Power supply 100VAC - 240VAC, 50/60 Hz, international adaptive power
Temperature Storage and operating temperature: -20 ℃ ~ +70 ℃
Humidity Storage and operating humidity: 10% - 90%
Mean time between failures 30,000 hours
Warranty 1 year free warranty and lifetime maintenance

Related Names
VGA Splitter with Audio | Audio Video Splitter | Matrix Switch

Inquiry Form